| Press |
| Press Kits |
 |
Press kits for trade shows and events are available for download:
|
|
|
|
SPS/IPC/DRIVES 2011
At the SPS/IPC/DRIVES Rexroth presents its comprehensive range of drive and control products and systems, also including multiplicity technologies.
The focus is on efficient engineering as well as on energy efficiency.
Machine manufacturers in all industries have to react to market changes more quickly and to launch new concepts on the market at the right time. In addition to reduced manufacturing and assembly times they are now focusing on streamlining the entire engineering process. Rexroth has developed a whole range of intelligent solutions which accelerate the engineering.
At the same time energy efficiency gets more and more important and machine builders are asked to respond to this request.
Rexroth presents IndraDrive power supplies with the intelligent energy management of the Smart Energy Mode. This software function helps to avoid peak loads on the mains side and to reduce losses in the mains connection line.
Rexroth at SPS/IPC/DRIVES 2011: hall 7, booth 450
|
|
|
|
|
MOTEK 2011
At the MOTEK Rexroth presents multiplicity technologies and solutions for the automation of assembly and handling tasks with a main focus on efficient engineering. On display are drive and control technology, pneumatic solutions as well as mechanical and tightening systems.
Rexroth at MOTEK: hall 3, booth 3305
|
|
|
|
|
Agritechnica 2011
Secure long-term earnings potential and increased efficiency with low-impact use of resources are the key criteria in modern agriculture. Rexroth supports these objectives with the numerous innovations the company will present at Agritechnica 2011.
Rexroth at Agritechnica 2011 - Hall 09, Stand E17
|
|
|
|
|
EMO Hannover 2011
On the world's premier trade fair for the metal working technology Rexroth presents amongst others the new system version of its IndraMotion MTX solution, which contains a number of innovations in the hardware and software.
Controls equipped with a multi-core processor execute programs at top speed, boosting productivity. The new energy monitoring function of the software facilitates energy efficiency in machine tool operation.
Rexroth at EMO Hannover 2011 - Hall 25, Stand D09
|
|
|
|
|
EU PVSEC 2011
As established automation partner with in-depth knowledge of the PV industry Rexroth has the right products for every process step – from ingot production, metallization, and stringing through to lay-up handling and flashing.
Rexroth at the EU PVSEC 2011 – Hall A1, Stand B11
|
|
|
|
|
Metec / Gifa 2011
Discover energy efficient automation solutions with Rexroth at Gifa and Metec in Düsseldorf.
On the Metec show exhibition Rexroth shows the crust braker, a tool used for the aluminium industry. With the new version of the IndraMotion MLC, the company presents an open motion logic system for easy automation of hydraulic, electric and hybrid drives
On the International Foundry Trade Fair GIFA Rexroth shows the variable-speed pressure and flow control system Sytronix DFEn 5000, a closed-loop control system for energy-efficient system solution.
Rexroth at the Metec 2011 – Hall 5 , Stand G15
Rexroth at the Gifa 2011 – Hall 11 , Stand H20
|
|
|
|
|
Intersolar Europe 2011
As leading specialist in the field of drive and control technologies for factory automation Rexroth supports the photovoltaic industry along the module production value-added chain - from wafer manufacture and solar cell production to modular assembly.
At the fair the focus is on EasyHandling, a modular set of perfectly matched electrical, mechanical and pneumatic components, that allows for custom solutions for numerous handling tasks.
Rexroth at the Intersolar Europe 2011 – Hall A5 , Stand 435
|
|
|
|
|
Showtech 2011
At the Showtech Rexroth presents one trap lift, control panels and intelligent solutions for energy saving.
Rexroth at Showtech 2011 – Hall 2 , Stand B30
|
|
|
|
|
LIGNA 2011
Increased material throughput, improved material utilization, higher flexibility as well as lower processing tolerances are required by the market in wood treatment and wood processing. Rexroth meets these requirements through its industry know-how and innovative products. At the exhibition stand at the LIGNA trade fair Rexroth presents energieefficient drive&control solutions.
Rexroth at LIGNA 2011 – Hall 26 , Stand A35
|
|
|
|
|
interpack 2011
Rexroth presents amongst others system solutions and new products for packaging machines that make engineering more efficient.
We are looking forward to meeting you in Hall 6, Booth A54/A57!
|
|
|
|
|
Annual Press Conference 2011
Bosch Rexroth back on course for growth. Company to achieve double-digit gains for the 2011 fiscal year. For more information, please see our press kit.
|
|
|
|
|
Hannover Messe 2011
"Rexroth is really living and breathing the slogan for the Hannover Messe International, "Get New Technologies First". The company is adapting this approach to take account of the relevant regional and technological requirements and believes it to be an essential tool in ensuring effective climate protection." (Dr. Karl Tragl, Chairman of the Executive Board of Bosch Rexroth AG )
Rexroth at Hannover Messe 2011 – Hall 23, Stand C19
|
|
|
|
|
Didacta 2011
Discover the flexibility of eLearning with Rexroth at Didacta trade fair 2011. Rexroth eLearning modules allow to enhance knowledge at any time of the day. At the exhibition stand Rexroth also play host to the unique DS4, with mobile hydraulics module.
Rexroth at Didacta 2011 – Hall 7, Stand B32
|
|
|
|
|
Boot 2011
On the boat show exhibition 2011 in Düsseldorf Rexroth again presents high quality and innovative drive and control components.
On focus is the alarm and monitoring system Marex AMC that gives skippers immediate access to vessel information and functions. Furthermore the Marex OS II control system can now be operated via a Yacht Controller wireless remote which makes docking even easier for ship captains.
Rexroth at Boot: hall 7a, booth F32
|
|
|
